Why Choose Our Plastic Injection Molding Service?
Wiesel brings over 15 years of engineering experience to every plastic injection molding project, with an established team handling OEM and ODM production across automotive, medical, packaging, and consumer goods industries.
±0.05 mm Dimensional Tolerance
Advanced Hot Runner System
Consistent Color Across Batches
Minimal Post-Processing
How Wiesel Handles Plastic Injection Molding Orders
File Review and Mold Engineering
Mold Fabrication and Setup
Injection Molding Production
Inspection and Delivery
Injection-Molded Parts Wiesel Produces
Wiesel manufactures four main categories of injection molded plastic parts: plastic housings, connectors, gears, and clips and snap-fit components.

The plastic housings used for electronic devices, industrial controllers and household appliances can provide protection and insulation properties.

Connector components used in electronic, electrical and industrial equipment, capable of meeting electrical assembly requirements.

Widely used in automation equipment, home appliances, and automotive components, it has low friction, lightweight, and wear-resistant properties.

Commonly used in product assembly, it achieves quick connection through elastic structure, reducing the need for additional fasteners such as screws.
Features of Plastic Injection Molding Manufacturing

Our plastic injection molding process can produce complex parts with clasps and detailed textures, with multiple structures achieved in one molding process.

High pressure injection and rapid cooling make the stable molding of thin-walled plastic parts, reducing material usage while keeping structural strength.

Use high-quality steel such as S136 or P20 to make sure that the molds are durable and can maintain consistent part dimensions over multiple cycles.

The parts can achieve good results within the mold without the need for additional processing steps.
Industries Served by Wiesel Injection Molding
Wiesel supplies custom injection molded plastic parts across four primary industries. Any specific requirement not listed, can be discussed with the team.

Interior components including dashboard panels and door panels, as well as exterior components such as front grilles and lamp housings, are produced for the automotive manufacturing industry. Materials and tolerances are selected to meet automotive fitment and durability requirements.

Plastic components such as syringe barrels, surgical instrument handles, diagnostic equipment casings and laboratory consumables. These parts have high requirements for the biocompatibility of plastic materials and the cleanliness of the production environment. ISO 9001 quality controls are applied across every medical production batch.Pl

Injection molded packaging including bottle caps, cosmetic containers, food trays, and industrial packaging is produced for consumer and industrial applications. Multi-cavity molds support efficient high-volume production of packaging components.

Toys, kitchenware, tool handles, and other daily necessities are produced for the consumer goods industry. Consistent color management and in-house surface finishing support the aesthetic requirements of retail consumer products.
What is Plastic Injection Molding?
Plastic injection molding is an industrial production process used to manufacture plastic parts at scale. Plastic raw materials are heated to a molten state and injected into a mold cavity under pressure. As the material cools and solidifies, it takes on the precise geometry of the mold, producing consistent, high-accuracy parts across every cycle.
The process is suited to complex geometries, thin-wall parts, and high-volume production where dimensional consistency and surface quality are required across every part in the batch. A single mold can produce parts with clasps, ribs, textures, and multiple structural features in one cycle, eliminating secondary operations.
For buyers sourcing from a plastic injection molding manufacturer in China, the key evaluation criteria are mold tooling quality, material processing capability, tolerance control, and surface finishing. Wiesel addresses each of these through hardened steel tooling, precision process monitoring, and in-house post-processing.
Hot Runner vs. Cold Runner: Which Is Right for Your Project?
The runner system controls how molten plastic flows from the machine nozzle into the mold cavity. The choice between hot runner and cold runner affects waste, surface quality, and production cost.
| Factor | Hot Runner | Cold Runner |
|---|---|---|
| Runner Waste | Minimal, plastic stays molten in runner | Runner solidifies and generates waste per cycle |
| Production Suitability | Best for high-volume production runs | Suitable for lower volume or simpler parts |
| Surface Quality | Reduced weld and flow marks on complex parts | More prone to weld marks on large or complex parts |
| Cost Efficiency | Higher tooling cost, lower per-part material waste | Lower tooling cost, higher material waste per cycle |
Wiesel uses an advanced hot runner injection molding system with precision temperature control from nozzle to mold cavity, well-suited for consistent, high-volume plastic injection molding production.
The main difference between the two is whether the plastic inside the flow channel has solidified. The hot runner system keeps the plastic in the runner in a molten state through heating, resulting in almost no runner waste. It is very suitable for mass production. The cold runner system allows the plastic inside the runner to cool and solidify with the product, but it will generate more waste.
Dimensional tolerance is determined by three factors: mold accuracy, which sets the basic geometric tolerance; process control over injection temperature, pressure, and speed, which affects shrinkage during cooling; and material shrinkage rate, which varies between plastic types. Wiesel uses closed-loop pressure sensors to monitor and control these variables, achieving ±0.05 mm tolerance.
You need to consider the production batch size, the plastic material, and the requirements for the product’s surface. For example, P20 steel is a common type of mold steel. It is suitable for most medium-scale conventional products. If you need a product with high gloss or transparency, you can choose the S136 stainless steel mold. It has excellent polishing performance.
For engineering plastics that require long-term production or have added fiberglass, you need to choose higher grade steel such as SKD61 or NAK80, which are more wear-resistant and heat-resistant.
One aspect is the accuracy of the molds. The machining accuracy of the molds directly determines the basic tolerance of the product. The deviation of injection molding temperature, pressure, and speed control can lead to uneven product shrinkage and affect tolerances.
The material properties also affect the tolerance. The shrinkage rates of different plastics vary. It is necessary to calculate the shrinkage ratio in advance and adjust the process to control the tolerance.
Yes. Wiesel uses high-pressure injection and rapid cooling to achieve stable molding of thin-wall plastic parts. This reduces material usage while maintaining structural strength. Thin-wall capability is confirmed based on part geometry and material selection at the quoting stage.
Plastic undergoes volume shrinkage when it cools from a molten state to a solid state. Different plastic materials have different shrinkage rates. For instance, materials such as polyethylene and nylon usually exhibit more pronounced shrinkage changes. The shrinkage rate is also affected by factors such as mold temperature, cooling time, and the thickness of the part.
A complete plastic injection molding production usually includes stages such as injection, holding, cooling, mold opening, and ejection. The cooling time is usually the longest part of the entire production cycle.
The wall thickness of the component, the thermal conductivity of the material, and the cooling system of the mold all affect the cooling efficiency. Plastic injection molded parts with thicker structures or larger sizes usually require a longer time to complete cooling.
Submit your part drawings or sample information through the inquiry form on the Wiesel website. A quote is prepared based on your geometry, material requirements, surface finish specification, and required quantity. Wiesel responds to inquiries within 24 hours. If you do not have a final design, the engineering team can assist from an early-stage brief or sketch.
Plastic undergoes volume shrinkage as it transitions from a molten state to a solid state during cooling. Different plastic materials have different shrinkage rates depending on their thermal and molecular properties. The injection molding machine maintains pressure after the cavity fills to compensate for shrinkage by pushing additional melt into the mold until the gate seals.
Yes. Wiesel uses high-pressure injection and rapid cooling to achieve stable molding of thin-wall plastic parts. This reduces material usage while maintaining structural strength. Thin-wall capability is confirmed based on part geometry and material selection at the quoting stage.
Wiesel processes high-performance engineering plastics including PEEK, POM, and Nylon, as well as standard engineering plastics for structural and functional applications. Material selection is based on the mechanical, thermal, and aesthetic requirements of your part and is confirmed at the quoting stage.
The gate is the channel through which the plastic melt enters the mold cavity. Its size and position can affect the material flow, the uniformity of filling, and the cooling efficiency. If the gate structure is not reasonable, it may cause problems such as insufficient filling, unbalanced flow, or local overheating. A reasonable gate structure can help the plastic fill the mold evenly and improve the stability of the molding process.
Ready to Start Your Plastic Injection Moulding Project ?
Explore More Injection Tooling Services
Rapid Injection Tooling Service
Rapid injection tooling designed for functional prototyping and low-volume production. This service bridges the gap between initial design and mass manufacturing with fast turnaround times.
Learn More →Plastic Injection Molding Service
Plastic injection molding services built to deliver durable, consistent components for both on-demand prototyping and high-volume runs. Choose from a wide selection of engineering-grade resins tailored to your exact specifications.
Learn More →Silicone Molding Service
Custom silicone molding solutions offering flexible, heat-resistant, and chemically stable parts for diverse industrial and consumer applications. Perfect for short-run production, gaskets, seals, and flexible prototypes.
Learn More →LSR (Liquid Silicone Rubber) Injection Mold
Advanced liquid silicone rubber (LSR) injection tooling engineered for high-precision, biocompatible, and thermally stable components. A reliable choice for medical, automotive, and consumer goods requiring high repeatability and clean production.
Learn More →







